Our Rubber Processing Oil products are of great quality and are developed in consideration with the usage and product requirement.
Rubber Processing Oil is used during the mixture of rubber compounds. Rubber can be synthetic or natural in nature and is used in the manufacturing of rubber products ranging from small rubber bands to huge vehicle tires.

Depending on the physical arrangement of the carbons atoms, rubber processing oil is broadly classified in to three major groups namely;

Paraffinic: These are used extensively in EPDM and Butyl rubbers.
Naphthenic: These are ideal for moulded articles, slippers, LPG tubes, floor tiles, etc.
Aromatics: These are mostly used to manufacture tyre, calendared and moulded sheets, tread rubber etc.

Uses / Applications

• Used during manufacturing of rubber products such as automobile tyres, rubber shock absorbers, footwear, industrial hoses, wire and cable coverings, flooring materials and carrier fluid or solvent in manufacturing of adhesives, sealants, polishes and carbon black.
• To improve physical properties of vulcanization and hence reduce the cost of finished rubber compounds.
• Used in tyre, rubber and dhoop industries.
• Used as a lubricant in rubber processing.
• Used in manufacturing of white oil. Also used as a component in ink production.

TEST	METHOD	UNIT	RMG SPEC ISO 8217 - 10	RESULT
Ash Content	ASTM D482 - 07	% m	Max 0.100	0.007
Pour Point	ASTM D87 - 11	°C	Max 30	-3
Carbon Residue	ASTM D180 -06	%m	Max 18.0	2.73
Flash Point	ASTM D93-12	°C	Min 60	142
Density @ 15°C	ASTM D4052 - 11	kg/l	Max 0.991	0.9895
Sulphur Content	ASTM D4294 - 10	%m		3.54
Viscosity,Kinematic @ 50°C	ASTM D445-12	mm2/s	Max 380	254.9
Water Content	ASTM D95-05	% vol	Max 0.50	0.10
Total Sediment Potential	IP 390 A	%m	Max 0.100	0.05
Aluminum + Silicon	IP 470	mg/kg	Max 60	<5
Sodium	IP 470	mg/kg	Max 100	2
Vanadium	IP 470	mg/kg	Max 350	3
Phosphorus	IP 470	mg/kg	Max 15	75
Zinc	IP 470	mg/kg	Max 15	9
Calcium	IP 470	mg/kg	Max 30	4

TEST	METHOD	UNIT	RMG SPEC ISO 8217 - 10	RESULT
Ash Content	ASTM D482 - 07	% m	Max 0.100	0.005
Pour Point	ASTM D87 - 11	°C	Max 30	-21
Carbon Residue	ASTM D180 -06	%m	Max 18.0	3.39
Flash Point	ASTM D93-12	°C	Min 60	222
Density @ 15°C	ASTM D4052 - 11	kg/l	Max 0.991	1.028
Sulphur Content	ASTM D4294 - 10	%m		4.42
Viscosity,Kinematic @ 50°C	ASTM D445-12	mm2/s	Max 380	1651
Water Content	ASTM D95-05	% vol	Max 0.50	0.15
Total Sediment Potential	IP 390 A	%m	Max 0.100	0.02
Aluminum + Silicon	IP 470	mg/kg	Max 60	<5
Sodium	IP 470	mg/kg	Max 100	40
Vanadium	IP 470	mg/kg	Max 350	3
Phosphorus	IP 470	mg/kg	Max 15	<1
Zinc	IP 470	mg/kg	Max 15	<1
Calcium	IP 470	mg/kg	Max 30	<1